Learn everything you need to know about blocking alarms in RmoniWeb.

Alarm Blocking

The RmoniWeb platform has several menu-times that are dedicated for our temperature monitoring functionality. Navigate to Sensors and then to Alarm blocking. 

All blocked sensors, alarms and organizational units are shown in this overview. The timestamp shows how long the alarms are being blocked for and it shows the deviation name. Two items will be explained below: 

1. Add deviation 
2. Edit deviation 

1. Add deviation 

To add an alarm deviation, click on Add deviation button. Creating an alarm deviation consists out of 4 steps: 

• Deviation level 
• Deviation name 
• Date range 
• Activate and recurring 

Each step will be explained below:

This first step consists out of selecting the deviation level. The following information is obligated: 

• Sensor 
   Select one or multiple sensors. All alarms linked to the selected sensor(s) will be blocked. 
  • Alarm 
     Select the alarm profile. The sensors linked to the selected alarm profile will be blocked (other alarm profiles linked to these sensors remain active). 

Give the alarm blocking a name. So it will be easier to recognize when looking at the overview. 

Select a date / time range so that no alarms will be generated during that time period. 

The fourth step is to activate the alarm and if needed make the alarm reoccurring. 

• Select the Active checkbox if this deviation should be active. 
• Select the Recurring deviation checkbox if the deviation needs to be reoccurring. Select the days that where the deviation should reoccur on. Please note that the time that was entered at the field Date range will apply to all recurring days as well. There are two options after selecting this option: 
  1. No end date 
  2. Select the end date. The alarm deviation will end on that that. 

2. Edit deviation 

By selecting the alarm deviation, it can be edited. The calendar view can be changes to a Monthly-, weekly- or daily view in the top left. There are 2 options when editing an alarm deviation: 

Select this option to edit just the selected deviation. 

Select this option to edit all occurrences of this deviation.  

Editing the deviation consists out of the same steps as adding an alarm blocking. When the alarm blocking is already recurring, there is no option to make it recurring again.